• Facebook
  • Linkedin
  • Youtube
  • Twitter
packaging testing equipment Water Vapor Permeation Tester
Search
Home / Search
  • Professional Dual - Pressure Methods Vacuum Decay Leak Detection Tester-AUTO GBM-L2 supplier
    Dual - Pressure Methods Vacuum Decay Leak Detection Tester-AUTO GBM-L2

    Introduction

    AUTO GBM-L2 Dual-Pressure Methods Vacuum Decay Leak Detection Tester adopts the test principle of vacuum decay method/pressure decay to detect micro-leakage of finished packaging. It can be applied to packaging systems composed of vials, ampoules, Leakage detection of pre-filled needles, eye drop bottles, HDPE bottles, infusion bottles/bags and other pharmaceutical packaging, food packaging, and chemical industry packaging.

    Test principle

    The host is connected to a sealed test chamber customized according to the sample. When performing the vacuum decay method test, the instrument evacuates the test chamber, and a pressure difference is formed inside and outside the sample. Under the action of the pressure, the gas/liquid in the sample enters the test chamber through the leak hole. The main engine uses the absolute pressure sensor and the differential pressure sensor to monitor the pressure change in the chamber to judge whether the sample leaks. When performing the pressure decay method test, the instrument fills the test chamber with a predetermined air pressure, and the gas in the test chamber enters the sample through the leak hole. The host uses absolute pressure sensors and differential pressure sensors to monitor the pressure changes in the chamber to determine whether the sample is leaking.

    Standard

    ASTM F2338-2009(2013),  YY-T 0681.18-2020,  USP<1207.2>, ASTM F2095

    Specification

    Item

    Technical Parameters

    Absolute pressure test range

    (0~300) kPa

    Differential pressure test range

    (-2~2) kPa

    Detection sensitivity

    13 μm

    Balance/Test Time

    13600 s

    Vacuum time

    13600 s

    Set flow rate

    03 mL/min

    Test system

    Dual Sensor Technology / Dual Cycle Test

    Test chamber 

    Customized according to samples

    Suitable for

    Vials, ampoules, prefilled needles, infusion bottles/bags, etc.

    Detection principle

    Vacuum Decay Method/ Pressure Decay Method

    Host size

    495 mm*455 mm*280 mm

    Ambient temperature

    20~30

    Relative humidity

    Max 80%no condensation

    Working power

    AC 220V, 50HZ

     

    Features

    Dual-Pressure Methods, to help solve testing difficulties

    The double combination of vacuum decay method and pressure decay method solves the problem of easy misjudgment and false negative for freeze-dried powder injections containing vacuum in the bottle using a single vacuum decay method.

    Based on dual-sensor and dual-circulation system technology, high-quality absolute pressure sensor and differential pressure sensor, with an accuracy of 0.1% FS, can effectively detect large and small leaks, accurately calculate the leak hole diameter, and give a pass or fail judgment.

     

    The instrument has low sensitivity and good test repeatability

    For rigid samples, the detection sensitivity is as low as 1 μm, and the test repeatability is as low as 0.8%. The instrument has stable performance, low noise and good repeatability.

    Imported brand accessories, excellent performance

    Imported brand vacuum pump, pumping rate up to 3 L/s, noise as low as 50 DB, high ultimate vacuum, convenient oil level detection and replacement.

    The imported gas mass flow controller can simulate micro-leaks arbitrarily, with a resolution of 0.001 mL/min, which provides a reliable guarantee for the method verification of instrument sensitivity.

    Large size touch screen, intelligent operation

    Color 7-inch touch screen, clear view, sensitive touch, easy to operate.

    Equipped with a micro-printer, USB data interface, and supports PC software measurement and control operation.

    The test software is designed according to the GMP appendix "Computerized System". It has an audit trail function and multi-level authority settings for users, which can meet the needs of the pharmaceutical industry for data traceability.

    Personalized customization to meet the needs of different samples

    For different test samples, it supports customization of suitable test chambers to meet the needs of different tests.

    For the same type of samples, it supports customized nesting mode, which can realize the sharing of a test chamber for samples of various specifications.

     

    Application

     

     

     

    Freeze-dried powder injection

    Injection

    Prefill needle

     

     

     

    Eye drops

    Plastic Ampoule BFS

    Infusion bags

     

    Factory configuration

    Standard

    Host machine, vacuum pump, test chamber and 3 sets of yin and yang control (customized as required), 11-inch touch panel, professional software (GMP)

    Optional

    Imported gas flow meters, air compressors, printers, calibration certificates

    View More
  • Leakage Tester
    Plastic Bags Electronic Leakage Tester GB- M2

    Electronic Leakage Tester applies to test the hermetic sealing quality and performance of packaging bags, bottles, cans and so on, used in industries of food, beverage, pharmaceuticals, personal care and so on






    View More
  • Professional Vacuum Decay Leak Detection Tester Package Leaking Test Machine Seal Integrity Testing Equipment supplier
    Vacuum Decay Leak Detection Tester Package Leaking Test Machine Seal Integrity Testing Equipment
    GBM-L1 Vacuum Decay Leak Detection Tester is used to perform micro leakage detection on finished packaging by vacuum decay method. It is suitable for leak detection for the integrity of various packaging containers and applied to ampoules, vials, HDPE bottles, prefilled needles and other pharmaceutical packaging, food packaging, and chemical industry packaging. It is advantageous in its’ non-destructive, non-damage and sample-free preparing characters.
    View More
  • 1
    GBPI ASTM D 3078 hermetic sealing quality test electronic leakage tester GB-M1
    GBPI Electronic Leakage Tester Application: To test the hermetic sealing quality and performance of packaging bags, bottles, cans and so on, used in industries of food, beverage, pharmaceuticals, personal care and so on.
    View More
  • plastic film testing
    Lab testing equipment pouch leak tester bubble emission test for ASTM D3078-2002

    The Leakage tester GB-M2 is designed and manufactured in accordance with the relevant provisions of GB/T15171 Test method for leaks in sealed flexible packages. It is used to detect the sealing condition of plastic packaging bags and containers, and it is applied to used in industries of food, beverage, pharmaceuticals, personal care and so on. Through test can effectively compare and evaluate the sealing technology and sealing performance of packaging parts, and provide scientific basis for determining the relevant technical indicators. It can also be used to test the sealing performance of the specimens after dropping and compressing test.

    View More
  • plastic bags leakage tester
    Flexible packaging test equipment Hermetic sealing tester leak tester GB-M

    leakage tester To test the hermetic sealing quality and performance of packaging bags, bottles, cans and so on, used in industries of food, beverage, pharmaceuticals, personal care and so on.

    View More
  • leakage and sealing strength tester
    Multifunctional leakage and sealing strength tester

    Intelligent Leakage Tester uses the working principle of pressurizing samples to test the sealing strength and integrity of packaging materials. It is suitable for food and medicine packaging materials such as flexible, rigid, porous and laminated aluminum foil. There are a variety of test modes, which can comprehensively evaluate the tightness and integrity of packaging materials. It has wide applicability, complete functions and accessories,which is comply with ASTM, ISO and GB standards. At the same time, our company provides suitable accessories and services for different samples


    View More
  •  Leak Test Equipment
    2022 High Quality Machines Package Leak Test Equipment

    Test Principle
    Firstly submerge the specimen in the water in the vacuum chamber, and then evacuate the vacuum chamber to form differential
    pressure between the inside and outside of specimen. The seal property can be obtained by observing the steady progression of
    bubbles from the specimen or observing how the specimen expands and restores to its original shape after vacuum release.

    View More

A total of 1 pages

Contact Us

Call Us : 15820231129

Email Us : info@gbtest.cn

Address : No.1 Minghua 3 St. Jinxiu RD., Economic Development Zone, Guangzhou 510730, China

Send A Message

Leave us a message, we will get back to you ASAP.

  • Facebook
  • Linkedin
  • Youtube
  • Twitter

Copyright @ 2024 Guangzhou Biaoji Packaging Equipment Co.,Ltd. All Rights Reserved.

Chat now

Inquiry Now

Home

Products

News

contact