GBPI Optical Testing Equipment Haze Meter YH1200 General‑purpose Model Looking for technical specs, quotation or application guidance? Get complimentary support from our professional testing instrument specialists. Click for Free Consultation Introduction The YH1200 Haze Meter (general‑purpose model) easily performs total luminous transmittance and haze measurements in accordance with both the ASTM D1003 (non‑compensated) and ISO 13468 (compensated) standards. Its open sample compartment supports both vertical and horizontal testing, accommodating a wider variety of samples. Equipped with a PD array detector that conforms to the CIE V(λ) 2‑degree standard observer response, the YH1200 delivers highly accurate and repeatable transmittance and haze data through its compensated measurement method. Application YH1200 haze meter is widely used in glass processing, plastic processing, film, display screen processing, packaging industry, liquid medicine analysis, etc. Technical Advantages Dual Standards: ISO & ASTMDesigned to meet the testing requirements of various users, the instrument complies with the following standards: ASTM D1003/1044, ISO 13468, ISO 14782, GB/T 2410, JJF 1303‑2011, CIE 15.2, JIS K7105, JIS K7361, and JIS K 7136. Easy Operation for Faster, More Accurate MeasurementsThe YH1200 Haze Meter features a large touchscreen interface for simple and convenient operation. Equipped with a PD array detector that adheres to the CIE V(λ) 2‑degree visual response, it ensures high‑precision, repeatable measurements of transmittance and haze. It also includes a USB data output port for seamless integration with laboratory information systems. Dynamic MeasurementIntegrated with independent light source detectors and temperature sensors, the device continuously monitors the light source and environmental conditions, ensuring the reliability of test data. Compensation Port for Enhanced Measurement AccuracySupports both the non‑compensated method (ASTM D1003) and the compensated method (ISO 13468) for total luminous transmittance and haze testing, delivering highly accurate results. Versatile Measurement and Broad Sample CompatibilityThe open measurement area allows for both vertical and horizontal testing, accommodating a wide range of sample types. Quality Management SoftwareIncludes powerful software for the analysis of haze and transmittance measurements, ideal for quality control across various industries. The software enables digital data management on a PC, allowing users to compare haze and transmittance values, generate test reports, and customize data management workflows to suit specific operational needs. About GBPI GBPI (Guangzhou Biaoji Packaging Equipment Co., Ltd.) was founded in 2002 in Guangzhou Economic and Technological Development Zone. It is a comprehensive high‑tech enterprise integrating R&D, manufacturing and sales of packaging & optical testing instruments. We deliver complete testing solutions for packaging, food, pharmaceutical, new‑material and laboratory industries. GBPI owns CNAS‑authorized testing laboratory and reference‑material development center, supplying instrument hardware, third‑party sample testing and calibration services for global clients. Interested in YH1200 Haze Meter for your laboratory? Reach out to GBPI for datasheet, quotation and professional technical support. Click for Free Consultation

  GBPI Optical Testing Equipment Light Transmittance And Haze Tester SGW‑810 Looking for technical specs, quotation or application guidance? Get complimentary support from our professional testing instrument specialists. Click for Free Consultation Introduction Suitable for measuring the light transmission and haze of all transparent or translucent parallel‑plane samples (such as plastic sheets or films), as well as the turbidity or clarity of liquid samples (such as water or beverages). It is designed for use in research institutions, universities, and industries including plastic products, packaging films, coatings, and inks. Applicable Standards GB2410‑2008, ASTM D1003‑2007, JIS K7105‑81 Specification Item Technical Parameters Accuracy Luminous transmittance accuracy: ≤1%Haze accuracy: For haze ≤0.5%: ≤±0.1% For haze >0.5%: ≤±0.3% Repeatability Light transmission repeatability: 0.5%Haze repeatability: 0.05% for haze ≤ 0.5%；0.1% for haze > 0.5% Measurement range Light transmission 0–100.0%, haze 0–100.0% Minimum reading Light transmission 0.01%, haze 0.01% Power supply 220v;50Hz Dimensions 700mm×270mm×300mm Weight 15kg Instrument Structure Item Technical Parameters Optical system Collimated illumination, diffuse viewing, and integrating sphere detection Sample size Solid sample dimensions: 50 mm × 50 mmLiquid cell dimensions: 50 mm × 50 mm × 10 mmThin‑film sample dimensions: 50 mm × 50 mm Light source Light Source C (6774K) Detector Silicon photovoltaic cell Electronic system Large‑screen LCD touchscreen Sample window dimensions Inlet aperture Ø25mm, outlet aperture Ø21mm Weight About 37kg About GBPI GBPI (Guangzhou Biaoji Packaging Equipment Co., Ltd.) was founded in 2002 in Guangzhou Economic and Technological Development Zone. It is a comprehensive high‑tech enterprise integrating R&D, manufacturing and sales of packaging & optical testing instruments. We deliver complete testing solutions for packaging, food, pharmaceutical, new‑material and laboratory industries. GBPI owns CNAS‑authorized testing laboratory and reference‑material development center, supplying instrument hardware, third‑party sample testing and calibration services for global clients. Interested in SGW‑810 Light Transmittance And Haze Tester for your laboratory? Reach out to GBPI for datasheet, quotation and professional technical support. Click for Free Consultation

  Introduction Designed and manufactured according tostandards likeGB/T 8809、ASTM D3420, GBG-L2 Pendulum Impact Tester is suitable for determining pendulum impact resistance of the film materials,composite film,metallic foil and so on. The machine can be used in scientific research, teaching, industrial and mining enterprises, laboratory, research institute and quality supervision department.  

The popular single-guidance electronic tensile testing machine GBL-H is a mechanical property testing machine developed and manufactured by the Guangzhou Biaoji R&D team based on GB, JIS, ASTM and other standard requirements and market demands. The instrument adopts high-precision sensors, and the force measurement accuracy is within ±1 %FS; professional software support, fully automatic operation, equipped with liquid crystal display screen, real-time display of test curve data and query test report, convenient and fast testing; Choose built-in or external, with perfect limit protection, overload protection, emergency stop and other safety protection functions.

GX-B3 type disc peeling tester is used for testing the adhesion fastness of printing ink layer of plastic film and cellophane decorative printed materials (including composite film printed materials) produced by gravure printing process. It can also be used to test the adhesion state of the surface layer formed by vacuum coating, surface coating, compounding and other related processes.  

Introduction Factory use vacuum freeze dryer is suitable for drying product such as food, drug products, biological products, Chinese medicine and more. It is to dry product at low temperature to preserve, stabilize, store and increase the life of products.. Freeze vacuum drying is a new type of box structure introduced by the vacuum freeze dryer that combines the refrigeration system, vacuum system, heat transfer oil heating system, and moisture removal system. It uses the space for storing materials in the box to dry. Main Technical Parameters   Item GB-LGJ-200F Drying chamber Freeze-drying area 2.25m2 Layers of shelf 5+1 Temperature scope of shelf -50℃-+70℃ (no-load) Shelf temperature error ±1℃ (in balance) Shelf spacing 70mm Size of shelf 500mm*900mm Condenser Min. Temperature of condenser ≤-70℃ (no-load) Water-capture capability ＞30Kg Liquid material 22L（thickness 10mm） Defrosting Electric defrosting Final Vacuum degree ≤ 5Pa Style of cooling Fan cooling Main functions Manual + Auto Control Mode, Sensor calibration, Intelligent temperature control, Freeze drying termination reminding and other functions are available.               Technical parameters □ Main configuration   Shelf effective area 2.25 m2 □ Specification   Shelf size 500mm × 900mm   Shelf numbers 5＋1（Radiation layer） Top shelf as temperature compensating plate   Material number plate 10 pcs   Shelf spacing 70 mm   Shelf temperature range -50℃～+70℃ （no-load）   Min. condenser temp. ≤ -70℃  （no-load）   System final vacuum degree ≤ 5Pa □ Basic configuration    Installation Power 13.5KW     ★ This is installed power, not operating power. □ Shape and other parts   Dimension（mm）： About 1200x2100x1700mm, L*W*H   Weight（Kg）：  About 1200   Noise ≤ 80dB   Electrical system Ground protection   Design, production, installation standards According to GMP, GB/T522 6.1-1996   Whole machine test Test, verify data, methods, and equipment support □ Drying chamber components   Shape Rectangular   Roughness of inner wall Ra ≤ 0.6μm   Opening direction Clockwise or anticlockwise (overlooking ,user confirm)   Chamber material AISI 304  stainless steel ◆  Door  material ACRYLIC   Working temperature ≥ 70℃   Thermal insulation material Polyurethane foam □ Shelf components ◆ Shelf material AISI 304  Top and bottom plate thickness 5mm ◆ Shelf structure AISI 304 stainless steel （Patent No. :ZL201020237059.X）   Roughness of shelf Ra ≤ 0.6 μm   Flatness ≤ ±0.5mm / m   Effective shelf size 500mm×900 mm   Amount of shelf 5＋1     Effective area of shelf 2.25m2 ◆ Shelf spacing  70 mm   Temperature decreasing rate +20℃ down to -40℃/ within 60 min, (no-load, entrance of silicon oil )   Temperature elevating rate -40℃ up to +20℃/ within 60 min, (no-load, entrance of silicon oil ) ◆ Shelf lowest temperature ≤ -50℃      (no-load, entrance of silicon oil )   Shelf highest temperature ≥ +70℃    (no-load, entrance of silicon oil )   Shelf temperature error ≤ ±1℃ ≤ ±1℃ ( in balance ) □ Condenser components   Condenser Shape Vertical type, cylindrical Compact structure, better water capture ,easy to clean and defrosting ◆ Condenser material AISI 304   Condenser water capture ≥ 30Kg   Condenser temp. Decreasing +20℃--40℃, within 30 minutes ◆   Condenser Min. temp. ≤ -70℃   Defrosting Electrochemical cream ◆ Thermal insulation material Polyurethane foam □ Refrigeration system   Refrigerator France original imported TECUMSEH full closure compressor ◆ Refrigerant Environmentally friendly refrigerant   Refrigerator number 2 sets   Shelf refrigeration 1 sets (shelf refrigeration at same time, indirect refrigeration)   Condenser refrigeration 1 set (shelf refrigeration at same time, direct refrigeration) ★ World famous devices are used to make sure correct, stable, safe and reliable.   High pressure protection device When system’s air discharge pressure exceeds allowed pressure, machine automatically stops working, to avoid an accident.   expansion valve DANFOSS（Denmark)   Top cover valve Castel（Italy）   solenoid valve DANFOSS（Denmark）   Oil separator ZOER   High pressure controller DANFOSS（Denmark）   Disacidify filter DANFOSS（Denmark）   Pressure meter LR/REFCO LR/REFCO(Germany/Swiss) oil submerge  pressure meter   Water cooling condenser Well-known brand □ Vacuum system ◆ Double stage rotary vane pump Tan's Vacuum Pump   Quantity 1 set ◆ Vacuum gauge Reborn   Chamber pumping rate Atmosphere→10 Pa ≤30 minutes(in dry condition)   System Maximum vacuum ≤ 5Pa   System leaking rate ≤ 10 Pa·l / sec □ Liquid circulation system ◆   Liquid low viscosity silicon oil ( 25℃, 5cst ) National qualified product   Liquid tubing material AISI 304, welding, heat  keeping ◆ Circulation pump ★GRUNDFOS, original imports, web rotor canned pump From Denmark brand, world famous brand   Circulation pump quantity 1 set   Heating rate 4kW   Heating control style Solid-state relay ◆ Stainless steel plate heat exchanger Well-known brands   Temperature sensor PT-100 platinum resistance □  Control system ◆ Control style Automatic and manual control ◆ Control system FD-PILOT   Control board SH-HPSC-II   Touch screen MCGS   Intermediate relay CHINT   AC contactor CHINT   Air circuit-breaker CHINT   Wiring terminals: Well-known brands □ Safety protection   Whole machine protection All safety conditions are ready for whole machine, machine can start running.   Operation protection Electrical system have logic interlock, control and protection function   Vacuum pressure Available   Heating system Available   Power cut and supply With safety protection measure   Products protection during sublimation process Heat cutting if vacuum lack   Condenser protection when vacuum pump start Interlock □ Whole machine design   Power 3Ph+N+PE, 380V   Installed power 13.5 KW (this is installed power, not running power)   Whole machine structure Integrated structure (easy for transport and placement)   Whole machine size About  1200x2100x1700mm, L*W*H   Whole machine weight (kg) About 1200   Time of warranty: One year after site acceptance.  

packaging barrier film water vapor transmission rate test also called moisture transmission rate test and WVTR

Y110 Oxygen Permeability Analyzer to test the oxygen transmission rate (OTR) of films or sheets materials.

  GF-2200Z Two-Station Rotary Tube Sealing Machine Product Introduction The fully automatic two-station rotary tube sealing machine is specially designed for automatic tube sleeving and heat sealing of straws and bags. It is applicable to straws of various calibers, lengths and models. It is the preferred automatic equipment for spout stand-up bags such as beverage packaging, suckable jelly, condiments and daily chemical products (laundry detergent, skin care products). It can be customized to connect with filling production lines for integrated operation. Technical Parameters Overall Dimension 2900mm x 2400mm x 2000mm (L × W × H) Sealing Type Stand-up bag, three-side sealed bag, gusset bag, special-shaped bag (customized) Material Type Bag: Inner PE, Inner PP materialTube: PE, PP material Product Specification Bag Length: 100~180mm, Width: 70~120mm, Sealing Length: 60~120mmStraw Caliber: 8.5mm (other sizes customizable) Working Speed 80-90 pcs/min (varies with different materials and bag sizes) Positioning Accuracy ≤±0.5 mm Sealing Cutter Group 6 groups in total: 1 preheating group, 4 heat sealing groups, 1 cooling group Temperature Control Module 2 sets (12-channel module), accuracy ±0.1℃ Heating Temperature Room Temperature ~ 300℃ Power Supply 380V/50Hz, 13KW Air Source 0.6~0.8MPa, 11L/min Equipment Weight 2000Kg Product Features The tube sealing machine adopts two-station design, with fully automatic operation of preheating, bag separating, tube loading and heat sealing processes; Sealed products are automatically sent to the transition machine, convenient for connecting and docking with subsequent production equipment; Adopts PLC control and intelligent parameter setting; parameters can be quickly configured according to different bag types and straws, easy operation; Equipped with imported temperature control modules and pneumatic components such as SMC, Festo and Airtac with stable and reliable quality; Adopts step-by-step heating and final cooling sealing process design to achieve perfect sealing performance; Automatic fault detection, alarm, shutdown, diagnosis and real-time fault location display; Light overall weight, small floor occupation and stable long-term operation performance; Main components are made of aluminum alloy and stainless steel, complying with food and pharmaceutical GMP environmental hygiene standards. System Composition The machine adopts dual-station structure, consisting of bag feeding system, tube feeding system, heat sealing system, bag dropping system, rejecting mechanism, transition machine, control system and machine base; The bag feeding system includes bag placing & positioning mechanism, bag picking mechanism and bag sleeving mechanism; the bag picking mechanism takes out finished bags one by one, and the bag sleeving mechanism loads bags into the bag holder and sleeves onto the straw; The tube feeding system is composed of vibration plate and transition trough mechanism; automatic detection and start-stop control during feeding process; The heat sealing system includes preheating, heat sealing and cooling, including 1 set of preheating cutter, 4 sets of heat sealing cutters and 1 set of cooling cutter; customized sealing and cooling cutters are available to adapt to straws of different specifications; Each group of sealing cutters supports independent temperature control, separate temperature setting and independent operation debugging; The bag collecting system consists of discharging mechanism and trough changing mechanism; sealed bags are discharged to the middle position, then pushed into the material trough; empty trough replacement is automatic when full; The operation interface real-time displays working status, including production speed, finished product quantity, shift output, date and temperature parameters. Application Fields Jelly Spout Bag Soymilk Spout Bag Care Products Bag Puree Bag Special-shaped Spout Bag Foldable Outdoor Water Bag

This product is based on the testing principle of the Coulometric Sensor Method testing Oxygen and is designed and manufactured with reference to ASTM D3985, GB/T 19789 and other standards. Adopting high-precision imported oxygen sensor, high test accuracy, it is suitable for oxygen transmission performance testing of films, sheets, paper, packaging and related materials in the fields of food, medicine, medical equipment, daily chemicals, photovoltaic electronics, etc., and provides a wide range and high-efficiency oxygen transmission rate detection for high, medium and low oxygen barrier materials.

 GBM-D1 intelligent sealing performance tester uses the working principle of pressurizing the sample to test the sealing strength and integrity of packaging materials. It is suitable for food and medicine packaging materials such as flexible, rigid, porous and laminated aluminum foil. There are multiple test modes for comprehensive evaluation of the tightness and integrity of packaging materials. Wide applicability, complete functions and accessories, in line with applicable ASTM, ISO and GB standards. At the same time, our company provides matching accessories and services for different samples.  

Product Introduction The LC-3S manual precision sample cutter can be used for precision sample cutting in tensile testing of materials such as copper-aluminum foil, battery separators in the new energy industry, various plastic films, paper, paper-plastic composites, and metals. This product is easy to operate, safe, reliable, and durable. The cut samples are smooth without burrs, enabling precise cutting of samples and effectively avoiding measurement errors caused by poor sample cutting.   Product Features Item Technical Parameters Material Thickness ≤1mm Cutting Specification 15mm × 220mm (customizable) Equipment Size 250mm × 550mm × 400mm Weight 9kg   Product Features ✦ The sample cutter has a compact design, is sturdy and durable, easy to operate, and efficient.✦ The cutting blade is made of high-speed tool steel, with a high-hardness edge that is sharp and durable. The cut samples are undamaged with smooth edges without burrs.✦ The width of the cut sample is 15mm, with high cutting precision, fully meeting standard requirements. It also supports customization of different sample cutting widths.✦ Both sides of the blade are designed with safety protection barriers, ensuring safe and reliable sample cutting process.