Vacuum Freeze Dryer GB-LGJ-200F

Brand:
GBPI

Inquiry now

Categories

New Products

Product Detail

Introduction

Factory use vacuum freeze dryer is suitable for drying product such as food, drug products, biological products, Chinese medicine and more. It is to dry product at low temperature to preserve, stabilize, store and increase the life of products.. Freeze vacuum drying is a new type of box structure introduced by the vacuum freeze dryer that combines the refrigeration system, vacuum system, heat transfer oil heating system, and moisture removal system. It uses the space for storing materials in the box to dry.

Main Technical Parameters

	Item	GB-LGJ-200F
Drying chamber	Freeze-drying area	2.25m²
	Layers of shelf	5+1
	Temperature scope of shelf	-50℃-+70℃ (no-load)
	Shelf temperature error	±1℃ (in balance)
	Shelf spacing	70mm
	Size of shelf	500mm*900mm
Condenser	Min. Temperature of condenser	≤-70℃ (no-load)
	Water-capture capability	＞30Kg
	Liquid material	22L（thickness 10mm）
	Defrosting	Electric defrosting
	Final Vacuum degree	≤ 5Pa
	Style of cooling	Fan cooling
Main functions	Manual + Auto Control Mode, Sensor calibration, Intelligent temperature control, Freeze drying termination reminding and other functions are available.

Technical parameters

□ Main configuration
	Shelf effective area	2.25 m²
□ Specification
	Shelf size	500mm × 900mm
	Shelf numbers	5＋1（Radiation layer） Top shelf as temperature compensating plate
	Material number plate	10 pcs
	Shelf spacing	70 mm
	Shelf temperature range	-50℃～+70℃ （no-load）
	Min. condenser temp.	≤ -70℃ （no-load）
	System final vacuum degree	≤ 5Pa
□ Basic configuration
	Installation Power	13.5KW ★ This is installed power, not operating power.
□ Shape and other parts
	Dimension（mm）：	About 1200x2100x1700mm, LWH
	Weight（Kg）：	About 1200
	Noise	≤ 80dB
	Electrical system	Ground protection
	Design, production, installation standards	According to GMP, GB/T522 6.1-1996
	Whole machine test	Test, verify data, methods, and equipment support
□ Drying chamber components
	Shape	Rectangular
	Roughness of inner wall	Ra ≤ 0.6μm
	Opening direction	Clockwise or anticlockwise (overlooking ,user confirm)
	Chamber material	AISI 304 stainless steel
◆	Door material	ACRYLIC
	Working temperature	≥ 70℃
	Thermal insulation material	Polyurethane foam
□ Shelf components
◆	Shelf material	AISI 304 Top and bottom plate thickness 5mm
◆	Shelf structure	AISI 304 stainless steel （Patent No. :ZL201020237059.X）
	Roughness of shelf	Ra ≤ 0.6 μm
	Flatness	≤ ±0.5mm / m
	Effective shelf size	500mm×900 mm
	Amount of shelf	5＋1
	Effective area of shelf	2.25m²
◆	Shelf spacing	70 mm
	Temperature decreasing rate	+20℃ down to -40℃/ within 60 min, (no-load, entrance of silicon oil )
	Temperature elevating rate	-40℃ up to +20℃/ within 60 min, (no-load, entrance of silicon oil )
◆	Shelf lowest temperature	≤ -50℃ (no-load, entrance of silicon oil )
	Shelf highest temperature	≥ +70℃ (no-load, entrance of silicon oil )
	Shelf temperature error	≤ ±1℃ ≤ ±1℃ ( in balance )
□ Condenser components
	Condenser Shape	Vertical type, cylindrical Compact structure, better water capture ,easy to clean and defrosting
◆	Condenser material	AISI 304
	Condenser water capture	≥ 30Kg
	Condenser temp. Decreasing	+20℃--40℃, within 30 minutes
◆	Condenser Min. temp.	≤ -70℃
	Defrosting	Electrochemical cream
◆	Thermal insulation material	Polyurethane foam
□ Refrigeration system
	Refrigerator	France original imported TECUMSEH full closure compressor
◆	Refrigerant	Environmentally friendly refrigerant
	Refrigerator number	2 sets
	Shelf refrigeration	1 sets (shelf refrigeration at same time, indirect refrigeration)
	Condenser refrigeration	1 set (shelf refrigeration at same time, direct refrigeration)
★ World famous devices are used to make sure correct, stable, safe and reliable.
	High pressure protection device	When system’s air discharge pressure exceeds allowed pressure, machine automatically stops working, to avoid an accident.
	expansion valve	DANFOSS（Denmark)
	Top cover valve	Castel（Italy）
	solenoid valve	DANFOSS（Denmark）
	Oil separator	ZOER
	High pressure controller	DANFOSS（Denmark）
	Disacidify filter	DANFOSS（Denmark）
	Pressure meter	LR/REFCO LR/REFCO(Germany/Swiss) oil submerge pressure meter
	Water cooling condenser	Well-known brand
□ Vacuum system
◆	Double stage rotary vane pump	Tan's Vacuum Pump
	Quantity	1 set
◆	Vacuum gauge	Reborn
	Chamber pumping rate	Atmosphere→10 Pa ≤30 minutes(in dry condition)
	System Maximum vacuum	≤ 5Pa
	System leaking rate	≤ 10 Pa·l / sec
□ Liquid circulation system
◆	Liquid	low viscosity silicon oil ( 25℃, 5cst ) National qualified product
	Liquid tubing material	AISI 304, welding, heat keeping
◆	Circulation pump	★GRUNDFOS, original imports, web rotor canned pump From Denmark brand, world famous brand
	Circulation pump quantity	1 set
	Heating rate	4kW
	Heating control style	Solid-state relay
◆	Stainless steel plate heat exchanger	Well-known brands
	Temperature sensor	PT-100 platinum resistance
□ Control system
◆	Control style	Automatic and manual control
◆	Control system	FD-PILOT
	Control board	SH-HPSC-II
	Touch screen	MCGS
	Intermediate relay	CHINT
	AC contactor	CHINT
	Air circuit-breaker	CHINT
	Wiring terminals:	Well-known brands
□ Safety protection
	Whole machine protection	All safety conditions are ready for whole machine, machine can start running.
	Operation protection	Electrical system have logic interlock, control and protection function
	Vacuum pressure	Available
	Heating system	Available
	Power cut and supply	With safety protection measure
	Products protection during sublimation process	Heat cutting if vacuum lack
	Condenser protection when vacuum pump start	Interlock
□ Whole machine design
	Power	3Ph+N+PE, 380V
	Installed power	13.5 KW (this is installed power, not running power)
	Whole machine structure	Integrated structure (easy for transport and placement)
	Whole machine size	About 1200x2100x1700mm, LWH
	Whole machine weight (kg)	About 1200
	Time of warranty:	One year after site acceptance.

Hot Tags:

Send A Message

Leave us a message, we will get back to you ASAP.

Subject :Vacuum Freeze Dryer GB-LGJ-200F

Related Products

Y310 2.0 Gas Analysis Equipment Oxygen Permeability Analyzer

This product is based on the test principle of the Coulomb oxygen analysis sensor and is designed and manufactured with reference to the ASTM D 3985 standard. It is used to determine the oxygen transmission rate (quantity) of film or sheet materials.

Vertical Heat Seal Tester GBB-C

Product Introduction GBB-C vertical heat seal tester can accurately measure the heat sealing temperature, heat sealing time, heat sealing pressure, and other heat sealing performance parameters of plastic packaging vertical bags, paper-plastic composite vertical bags and metal composite vertical bags(boxes). The heat sealing performance of samples of different materials are different. And the best heat sealing conditions can be accurately obtained through the determination of their heat sealing performance parameters. Testing Principle Put the sample on the lower tray of the instrument, adjust the appropriate height according to the size of the sample, set a certain sealing temperature, time and pressure as required, and start the instrument with one key. The fixture on the instrument will heat seal the sample according to the setting parameters. Under the manual state, step on the foot switch, and the heat sealing knife is pressed. The heat sealing time is determined by the value set by the time control. In the automatic state, the upper and lower heat sealing knives of the heat sealer will automatically heat seal repeatedly according to the set time. Standards ASTM F 2029 Specifications Item Technical parameters Temperature range Room temperature～250℃ Temperature precision ±1℃ Seal time range 0.1s～99.99 h Pressure range (0~1) MPa Heat seal area Upper and lower sealing knife 300×5.5 mm, slide lower bar has silicone pad as buffer Heat seal method Two ways: automatic or manual, external air cylinder Air supply Compressed air Instrument size 730(L) mm×400(B) mm×535(H) mm Weight 45 kg Power 1200 W Power supply AC 220V，50Hz Characteristics u High progress imported quality sensor, quality assurance Original imported temperature sensor, wide temperature control range, high sensitivity, temperature control accuracy of ± 1 ℃, it has ultra-high stability and ultra-low failure rate. u Independent control of heat sealing temperature The rear of the heat sealing knife is equipped with a temperature sensor, and the temperature control of the inner and outer sealing knives is independent and set separately. u Personalized test selection Manual testing and automatic testing are free to choose. The automatic mode is time-saving and convenient, and the repeatability is fully automatic for heat-sealing the sample; the manual mode is equipped with a suitable foot switch, step on the foot switch, the heat sealing knife is pressed, and the safety protection is easy to operate. u New air drive system The drive system consists of a pressure gauge, a pressure regulating valve, and a cylinder. After the compressed air is introduced, the pressure is adjusted through the pressure valve, the air pressure can be accurately locked, and the heat sealing clamp is pneumatically driven, which is convenient and efficient. u Wider range of customized services The anti-sticking function of the heat sealing knife can be upgraded as needed, experience upgrade, and it is more intuitive and convenient to determine the best heat sealing conditions. The shape, size and smoothness of the sealing knife heat cover can be customized to meet different scientific research needs. Application Plastic stand up pouch Paper plastic stand up pouch Aluminized stand up pouch Milk Boxes

Disposable medical mask respiratory resistance tester

The respiratory resistance tester is suitable for determining the inhalation resistance and exhalation resistance under the regulations of respirators and masks, and for the related testing and inspection of ordinary mask products by the national labor protection equipment inspection agency manufacturer.

Falling Dart Impact Tester GBD-L2

GBD-L2 falling dart impact tester is suitable for testing materials such as plastic film or sheet and steel plate coating with a thickness of less than 1mm. Under a given height of free falling dart impact, it can measure the energy (in Quality to express results) of plastic films,thin section specimens and other materials. Through the impact resistance test, it can prevent the packaging surface from being damaged when the packaging material is impacted or dropped due to insufficient toughness of the packaging material, and effectively avoid the product from being damaged due to impact or falling in the circulation link. It can be used in scientific research, teaching, industrial and mining enterprises, laboratories, research institutes and quality supervision departments.

HP-D1 Automatic Torque Tester Non-Destructive Cap Torque Tester

The HP-D1 Automatic Torque Tester HP-D1 is innovated to test cap torque for detecting sealing performance of packaging containers, such as plastic bottles, liquid boxes, cans, etc.

Plastic Films Heat Seal Tester With Five-point GBB-F

Heat Seal Tester is to test the temperature, pressure, and time for heat sealing of various film materials.

GBB-R1 Melt Flow Indexer (MFI)

Introduction It is used to determine the MFR & MVR value of the melt flow rate through the standard die every 10 minutes when various plastics and gums pass through a certain temperature and load in a viscous flow state. It is suitable for melting high temperature polycarbonate, polysulfoxide, fluorine plastics, nylon and other engineering plastics. Also, it is appropriate for the polyformaldehyde, polystrene, polypropylene, ABS resin polyformaldehyde, polycarbonate resin and other low temperature plastic melting test. The machine is widely used in plastic production, plastic products, petrochemical and other industries as well as related universities, scientific research units and commodity inspection departments.

ZM-100 inverted pressure sterilized boiler

ZM-100 Inverted pressure sterilizer boiler is used for sterilization and high temperature test of packaging materials (including adhesives and printing ink) in the industries of packaging, plastic films, food, medical units, inspection agency, research institute etc.

water vapor transimission rate testing instrument for plastic packaging properties test -

Three test chambers water vapor permeability analyzer using infrared sensor is the highest accurate water vapor transmission rate tester, meeting standard of ASTM F1249.

UV lamp aging test chamber GB-OUVA-115

Accelerated weathering tests are performed on materials by simulating ultraviolet radiation and condensation in natural sunlight to obtain results on material weathering resistance. It can simulate environmental conditions such as ultraviolet, rain, high temperature, high humidity, condensation, and darkness in natural climates. By reproducing these conditions, it can be combined into a cycle and allowed to automatically complete the cycle as required.

GBR Hot Tack Tester For Sticking Strength of Packaging Films

GBR hot tack tester is to test the sticking strength of packaging films after heat sealed with different temperature, pressure and time. To test the sticking strength of packaging films after heat sealed with different temperature, pressure and time. It simulates the use of packaging bag and makes impact experiment on the part of hot tack.

GBPI ASTM D 3078 hermetic sealing quality test electronic leakage tester GB-M1

GBPI Electronic Leakage Tester Application: To test the hermetic sealing quality and performance of packaging bags, bottles, cans and so on, used in industries of food, beverage, pharmaceuticals, personal care and so on.

what are you looking for?

Environmental Test Equipment

Other

Vacuum Freeze Dryer GB-LGJ-200F

GF2600-X Spout Sealing Machine for slanted bag

GBPI Intelligent sealing performance tester

GBN200G Compression Resistance Test Machine For Plastic Bags

AUTO GBDA-180 Compost Degradation plastics test equipment

W812 Water Vapor Permeability Analyzer(Cup Method) WVTR Testing Equipment For Packaging

HP-D1 Automatic Torque Tester Non-Destructive Cap Torque Tester